OEM LCD with Digitizer Replacement for Motorola Moto G4 Plus Black

WitrigsSTK:112822

Fiyat:
İndirimli fiyat$35.00 AUD Normal fiyat$40.00 AUD

Açıklama

OEM LCD with Digitizer for Motorola Moto G4 Plus Black Description

-Brand new and original LCD with Digitizer replacement.

-Compatible with Motorola Moto G4 Plus only.

-Available in Black and White. This is the Black one.

-It comes with the LCD screen and Touch screen.

-It is used to replace your Motorola Moto G4 Plus damaged LCD with Digitizer, such as blank or darkened screen, shaking rapidly, broken screen, less sensitive screen. If such problems occur, you can come here and find a new original LCD with digitizer for replacement and get your Moto G4 Plus back to normal.

 

How to fix?

1. Screen freezing or restating itself

- First, wiping the cache partition.

- If you did the above and the problem returns, test safe mode and see if a third-party app that you’ve installed might be causing the issue.

2. Screen burning

- Turn your screen brightness down and reduce your screen timeout. You can do both via Settings > Display and then Brightness level and Sleep.

- You could try an app like Screen Burn-in Tool and see if it helps.

- Back up everything and try a factory reset via Settings > Backup & reset > Factory data reset.

3. Ghost touch when charging

- Don not use your Moto G4 Plus while charging as much as you can.

- Try using a different cable and charger.

4. Yellow tint on display

- Take a look in Settings > Display > Color mode and change your settings.

- Consider contacting your retailer or carrier and asking about a replacement handset.

 

However, if the methods above cannot fix the screen problem, then you should turn to the hardware solution: change a new screen. Is it hard to repair it? Here we also provide a video repair guide for Moto G4 Plus screen replacement.

 

Tips for replacement:

1. Clean up the original adhesive before putting on the new adhesive.

2. Afresh disassembly the original adhesive will lose best viscidity, so you need to care about the adhesive is installed in to precise place.

3. If the worn screen is broken, you can put the adhesive tape on the broken screen to prevent shutter injury.

4. Make sure the screwdriver was right for the screw. The screws of G4 Plus are soft and easily be messed up, so be careful when removing them.

 

Tips

-Please check your model before ordering.

-Professional and careful operation is recommended.

-Matched tools are recommended.

Package Content

1 x OEM LCD with Digitizer for Motorola Moto G4 Plus Black

Packing Details

-Weight: 0.04 KG

-Packing Size: 14.9 × 7.3 × 0.3 (CM)

-Estimated Shipping Weight: 0.11 KG

Find what you need

Tell us what mobile phone parts you need and we will find them for you.

Repair with confidence

All of our products are triple-tested and meet strict quality standards.

Fast and high quality delivery

We support delivery to many countries around the world.

You may also needy also like

Recently viewed